AGW – LW is a full size light weight Automatic Girth Welder | AGW | 3 O’clock Welder | Tank Welder built with an open frame design to reduce the weight.
AGW1-SP-LW is a light weight open frame single sided and the AGW2-SP-LW is a double sided full size AGW LW machine built to meet the requirements of flat bottom and LNG / LPG (double wall) tank construction companies in North America:
The AGW – LW is available as an AGW1-LW single sided & AGW2-LW double sided are Automatic Girth Welder (AGW) witch is also know as a (3:00, 3 O’clock welder) built with expandable seating area frame to provide more room for the operators when there is room for this to be done on Flat bottom tanks. This design also allows the seating area frames to be removed so the operator can stand on scaffold while operating the AGW on LNG and Flat bottom tanks. It is also built to fit in the narrow space between the outer tank wall and the inner LNG tank shell plate to perform low-temperature storage tank automatic girth welding. AGWI/II-USA are available in standard proven designs and custom built-in single or double sided configurations. MPS = mobile power source is another option that can be added to most of the full size AGW’s we offer.
The AGW Tank welders are a series of self-propelled Automatic Girth Welders (3 o’clock) welding equipment primarily developed for on-site erection of large storage tanks, silos, blast furnaces and similar cylindrical objects. It is available as a single-side version and a double-side version. Usually it is designed to travel on the top edge of the tank shell. As there are different ways of building tanks, one machine in the series is designed to travel on a rail which is temporarily fixed to the shell or on a stand-alone ring outside the shell. This line of equipment is built to safety European CE safety standards and USA / Canadian safety standards cETLus approved for use in North America.
The operator of each machine (of the full size version) rides in a cabin, where he supervises and controls the welding process with the control panel within easy reach. The cabin, whose floor level under the carriage is variable to suit the height of the plate, is built as a cage to give the operator(s) maximum safety and comfort. For weather protection the cage can be covered by curtains. The cabin of a double-side machine is equipped with ladders our an internal frame climbing system and a joining bridge at the top to facilitate for the operators to climb from one side to the other. The top and bridge has guard rails for the safety of the operators
- Double wall storage tank welding can be equipped for AC welding or DC welding applications
- Standard AGWI/II-LW by design can weld plate width up to 3.8m without modification, 4.5m wide plate with some minor modifications and a custom built AGWI/II-USA can weld plate wide as 7.5m.
The girth welder is an automatic welding machine that straddles the tank plate and is used to complete a tanks circumferential weld joints. It’s typically used in a single or double sided configuration. In the single sided configuration one operator is required and welding on one side of the joint occurs. In the double sided configuration two operators are required and welding occurs simultaneously on both sides of the weld joint.
Use of girth welders will offer increases of productivity of by up to 10 times as opposed to manual completion and with the additional benefit of improved weld quality.
Girth Welders Features
- Fully integrated with LINCOLN electric submerged arc welding systems as standard (other welding systems on client’s request).
- Twin SEW motors drive system for reliable and steady weld travel .
- Inverter control for accurate speed adjustment.
- Fully adjustable weld head/ flux belt assembly.
- Precision machined slides ensure correct weld placement.
- Laser pointer to ensure correct tracking of the weld head in the circumferential seam.
- Powerful, reliable and efficient blower type vacuum flux recovery system.
- Flux heater option to keep flux away from moisture.
- Sequence control in “Auto mode” to allow one button startup.
- Integrated control with cooling for reliable operation in high temperature environment.
- Ergonomically positioned for the operator.
- Standard AGW configuration is the reliable LINCOLN welding system, or other brands of welding system can be selected according to customer requirements.
- Dual AC variable frequency motor drive ensures that the AGW welding machine could walk along the storage tank stably within a certain speed range.
- The machine head is equipped with welding seam automatic tracking system, and the welding gun could position accurately during the welding process.
- Powerful vacuum pump mounted in the middle part of the AGW frame to provide an effective flux recovery and recycling system.
- Additional flux holding mechanism has been added just above the welding head and flux belt to provide a more consent flow of flux to the welding process.
- The welding machine could be operated conveniently and clearly via the integrated control panel.
- The special model could be used for double side welding of liquefied petroleum gas, liquefied natural gas tank, and upward installation/inverse installation welding.
- MPS (mobile power source, diesel welding machine) available for single or double sided welding
- Electric winch with arm mounted on top of AGW frame for lifting flux and wire from ground level to the working levels of the AGW
- Flux hopper heating element
- Automatic girth weld seam buffing attachment
- Intercom for the double sided AGWII-LW
The line of tank equipment we supply includes items such as over 10 models of the Automatic Girth Welder (AGW), AGW-LNG, AGW-USA, AGW-LW Light Weight Automatic Girth Welder AGW-1, AGW-11, AGW-P, AGW-P2, AGW-stiffener welder, AGW-Mini, AGW-Sphere welder, AGW-Mig, witch are also know as a (3:00, 3 O’clock welder) Including an AGW built for tank Jacking (tank jack-Up) projects.
Tank Welding LLC.
Is your complete source for Automatic Storage Tank Welding Machines.
We specialize in custom built to order automatic tank welding machines for LNG & flat bottom tanks. We have over 10 standard Automatic Girth Welders (AGW) A.K.A. (3:00, 3 O’clock Welder) designs. EGW (Electrogas Welder), VUP & AVW Automatic Vert Welders, Vert Buggy, Tank Jacking systems, automatic Sphere, Pipe, Shop, & Shipyard welders. This line of equipment is built with your choice of USA made Lincoln or Miller welding systems. Our AGW travel is powered by top of the line twin German engineered inverter controlled SEW drive motors.
Tank Welding LLC specializes in supplying standard designs along with custom built to order automatic welding and erection equipment for the global Tank, Pressure Vessel construction & fabrication industry. Tank Welding also offers multiple types of automatic Pipe welders, Ship Yard, Fab Shop automatic welding, cutting and positioning equipment. The line of tank equipment we supply includes items such as over 10 models of the Automatic Girth Welder (AGW), AGW-LNG, AGW-USA, AGW-LW Light Weight Automatic Girth Welder AGW-1, AGW-11, AGW-P, AGW-P2, AGW-stiffener welder, AGW-Mini, AGW-Sphere welder, AGW-Mig, AGW-Jack-UP, which are also known as a (3 O’clock welder), EGW-V (Electrogas Welder), EGW-P (Electrogas Welder), EGW-Jack-UP (Electrogas Welder), EGW = Electro Gas Welder witch is also known as a Vertical Up Welder (VUP), is a single pass Vertical-Up welder (VUP), AVW-multi pass, AVW-Jack-UP, AVW automatic vertical welder, manual and electric powered Shell Buggy (also know a Vert Buggy), Tank Jack-up systems and a lot of various tank welding & erection equipment to fit most company’s needs. Explore all of our merchandise and feel free to contact us by phone or email. Click here for our Equipment Catalog
In the global market place, we offer standard designs and custom-built welding, cutting, erection equipment for the Tank, Pressure Vessel construction & welding industry. We also offer multiple types of automatic Pipe welders, Ship Yard, Fab Shop automatic welding & cutting equipment. Our line of equipment includes items such as the (AWP) Automatic Pipe Welder, Custom Engineering, Column & Boom Manipulator, Header Welder, L Positioner, Longitudinal seam welder, Pro-Cut automatic cutting equipment, Ship Yard (EGW) Electrogas Welder, Turning roll, Welding Lathe, AGW flux belt, Automatic Grinder, Automatic Vert Buggy, Manual Vert Buggy, Tank Jacking (Tank Jack-UP) systems, Automatic girth seam gouger, AGW and AVW (MPS) Mobile Power Source, LT7 magnet attachment device, LT7 seam tracking attachment, Automatic Girth Welder (AGW), AGW-LNG, AGW-USA, AGW-LW Light Weight Automatic Girth Welder AGW-1, AGW-11, AGW-P, AGW-P2, AGW-stiffener welder, AGW-Mini, AGW-Sphere welder, AGW-Mig, AGW-Jack-UP, which are also known as a (3:00, 3 O’clock welder), EGW-V (Electrogas Welder), EGW-P (Electrogas Welder), EGW-Jack-UP (Electrogas Welder), EGW=Electro Gas Welder witch is also known as a Vertical Up Welder (VUP), is a single pass Vertical-Up welder (VUP), AVW-multi pass, AVW-Jack-UP, AVW automatic vertical welder, manual and electric powered Shell Buggy (also know a Vert Buggy), Tank Jack-up systems and a lot of various Tank Welding & erection equipment to fit most company’s needs.